Asphalt Crack Filler

Asphalt Crack Filler

Product Info

Asphalt Crack Filler is a modern day advancement in the way Pavement cracks are sealed, enabling fast efficient repairs to large areas and tight restricted sections.

Colour: Black

Sizes: 1 litre

Features & Benefits

  • Solvent free and non flammable
  • Free of dangerous carcinogenic and toxic odours
  • Cold application without heating requirements or OHS hazards
  • Fast drying properties
  • Excellent adhesion and penetrating properties to
  • Asphalt, bitumen and concrete surfaces
  • Excellent crack bridging properties
  • Forms a flexible non tacky film
  • Excellent water and weather resistance
  • Resistant to sulphates, ground salts, diluted acids
  • Trafficable after 10 minutes in normal ambient conditions (20°)


  • Asphalt/concrete road crack sealer and repair compound
  • Bitumen sealing compound for horizontal joints and gaps
  • Sealer between new and existing asphalt layers
  • Waterproof seal in pavement cracks
  • Pourable joint filler on bitumen/asphalt surfaces
  • General sealing and prevention of water ingress into road cracks

Asphalt Crack Filler

How To Use

Surface Preparation

  • Surfaces myst be clean, sound and stable before commencing application
  • Surfaces must be free of sharp protuding materials, loose or de-bonded coatings, curing or release agents, wax residues, foreign particles, laitance, algae and moss, grime, oils, animal fats or grease
  • Structurally unsound layers and surface contaminants are to be removed by abrasive blasting, blast tracking, grinding or similar
  • To ensure good adhesion and successful application, it is recommended that surfaces affected by oil, petroleum, grease residues etc are to be cleaned using a biodegradable degreaser before commencing
  • Steel floated concrete must be treated by abrasive blasting, blast tracking or grinding, followed by water blasting to remove release agents and surface contaminants


  • Surfaces must be dry, clean and free of loose foreign matter and debris
  • Coverage will depend on depth and width of crack; as a guide 1 litre will cover approximately 80m length and 2mm width and 5mm depth